High Productivity GKH Series Horizontal Peeler Centrifuge Factory
Price
Product Description
The GKH800-NA centrifuge is a siphon scraper discharge centrifuge.
The machine is equipped with a PC, and the working process is
automatically controlled.
In addition to centrifugal force, there is a vacuum siphon suction
force for the dehydration of liquid, which has higher production
capacity and separation and washing effect compared with the common
scraper discharge filtration centrifuge.
This machine has a wide range of application, besides the material
separated by the common scraper discharge filtration centrifuge, it
is also suitable for materials with small solid particles and
difficult to be separated, such as starch, calcium phosphate, etc.
During the operation of the machine, all processes, such as main
feed, auxiliary feed, discharge and recoil, are completed at the
working speed.
Adjusting items of machine
1. Adjustment of working pressure of oil pump
Adjust the overflow valve to make the oil supply system pressure
3.0-4.0mpa. Adjust the pressure to ensure the operation of each oil
cylinder under load. Take the scraper cylinder as example, scraper
easy action in the low working pressure, the rest of the cylinder
can work normally, needn’t higher the oil pressure. Increased drag
after blade wear is not included.
2.Stop position adjustment of scraper
When the scraper is working, the rocker arm on the scraper device
touches the limit bolt, and the distance between the scraper and
the press cloth (or filter) in the drum is 5~ 10mm. By adjusting
the limit bolt of the door cover and adjusting the position of the
proximity switch or switch seat, the axial clearance between the
scraper blade and the bottom of the rotary drum and the bar shall
not be less than 5mm
3. Drum loading amount, filter cake thickness according to
different materials, generally not more than 80mm, weight of dry
material less than 100kg
4. Adjust the working procedure time during operation
It is mainly determined according to the specific material, which
cannot be fixed and can meet the requirements of the material in
the centrifuge section. If the machine and equipment allow, the
production cycle can be shortened and the output can be increased.
The time range of the general working procedure is 0~30 seconds.
Feeding process is 3-60 seconds: filtering process is 0-300
seconds; The secondary feeding process is 0~60 seconds; The drying
process is 0~300 seconds; Scraping process is 18~30 seconds.
Successfully Application
GKH series siphonic centrifuge is especially used in the occasion
of the higher production, lower moisture in residue of the cake and
sufficient washing.
It is widely used in industry area of the solid-liquid separation
of the raw material and intermediate products, such as foodstuff,
pharmacy, chemical, national defence and so on.
| Starch | Vitamin B |
| VC natrium | Calcium phosphate |
| Saleratus | Polyacrylonitrile |
Technical Paramaters
| Mofel | GKH 800 |
| Drum diameter | 800 mm , about 31.5 inch |
| Drum length | 450 mm , about 17.7 inch |
| Drum speed | 1550 rpm |
| Maximun separation factor | 1070 |
| Motor power | 45 Kw |
| Loading capacity | 150 Kg |
| Weight | 5500 Kg |
Our service
1 . Technicians are available for overseas service.
2 . 12 months guarantee period from machine arriving date.
3 . The customer could get trained by our experienced tecnician
4 . We always keep certain inventory level of spare parts, which means
the replacement can be sent to you timely
