Fuel Centrifugal Solids Separator / Remove Centrifugal Oil Water
Separator
Centrifugal Solids Separator Description:
Centrifugal Solids Separator can dehydrate the turbine oil, remove
oil sludge, colloid , emulsion and other impurities and enhance the
maintenance level of the equipment.
During the treatment, there is no need of stopping the machine and
replacing new oil, the noise is low and the purifying capacity is
high.
Centrifugal Solids Separator can reduce the diesel engine abrasion
and prolong the machine’s life, and ensure the diesel engines can
operate normally. The maximum viscosity of treated oil can up to
380cst/50ºC(3500SRW1/100ºF)
Outline and Compositions of the Separator
The separator mainly consists of inlet/outlet, drum, cover,
vertical shaft, cross shaft, stand, motor and automatic control
box, etc.
Centrifugal Solids Separator Application
1. Treatment of fuel
2. Treatment of lube
3. Treatment of oil, water and solid substances
4. Treatment of drilling slurry
Centrifugal Solids Separator Parameters
| Model | Treatment Capacity L/H | Inlet Pressure MPa | Outlet Pressure MPa | Motor Power kw | Weight(Kg) | Outline Dimension mm |
|
| DHKY360 | 1000-5000 | 0.05 | 0.1-0.25 | 7.5 | 1280 | 1500*1150*1500 |
| DHKY470 | 3000-10000 | 0.05 | 0.1-0.25 | 15 | 1880 | 1800*1200*1800 |
Our service
1. Professional Engineer wil recommend you the most suitable model
according to your requirement.
2. Supply reference process flow chart .
3. Supply on-site installation and operation test
4. Integration for control system and process
5. Customized size and structure
6. 12Months guarantee period from machine arriving date.
7. Sufficient spare parts in stock are available .
8. Technicians are availabled for overseas service.
9. 24 hours technical consultation .
Troubleshooting
| Phenomena | Cause | Remedy |
| The drum fails to reach rated speed or starting time is too long
(speed indication is less tan 63 r/min) | 1,The braking handle is not released | 1,Press down the braking handle |
| 2,Too less oil in the hydraulic coupler | 2,Add oil for coupler |
| 3,Mechanical rubbing exists inside the separator | 3,Check the installation condition of the separator |
| 4,Big helical gear slips | 4,Tighten the locking screws of the big helical gear |
FAQ:
How does a disc centrifuge work?
A disc stack centrifuge separates solids and one or two liquids
simultaneously. This is a single continuous process. The centrifuge
uses extremely high centrifugal forces to separate the phases. The
denser solids subjected to this force move outwards towards the
rotating bowl wall.
